E-2
E-2
V1.0
For a complete tight fit every bolt
should have a flat washer.
All panels are labeled Left and Right as
viewed from the front of unit.
1. Locate the Center Front Panel (D), Right
Front Panel (C) and Left Front Panel (B) and
set out face down on a scratch-free surface.
2. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
3. Push the Right Front Panel (C) and Left Front
Panel (B) snug to the Center Front Panel (D).
Make sure the Wood Dowels (N) are seated in
the pre-drilled holes. Insert Bolt (L) and
Washer (M) into the pre-drilled holes in the
mounting blocks.
HAND TIGHTEN ONLY.
Left
Front
Panel
Right
Front
Panel
Center
Front Panel
N
N
N
B
L
M
C
D
PLEASE READ AND FOLLOW ALL SAFETY TIPS
GETTING STARTED
1. Before assembly, carefully use scissors or utility knife to cut and unwrap all parts. Make sure you
do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: www.tsicustomerservice.com or call 1-866-661-1218 in English, 1-866-661-1219 in
French or 1-866-661-1219 in Spanish. Please identify the parts you need and model number.
Make sure to include your name and address.
CAUTION:
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
HELPFUL HINTS
•
Some steps are more easily handled with two adults.
•
Attach the fireplace insert to the completed wood mantel last. Install insert in from the back of
the fireplace so as not to scratch the hearth/base.
•
Use care in assembling your new fireplace, take your time and use the hardware provided and a
quality Phillips head screwdriver.
NEVER OVER TIGHTEN BOLTS.
•
Do not sit on any part of the mantel.
CARE & CLEANING
1. Dust your fireplace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fireplace with a gentle non-abrasive household cleaner. Make sure to dry your
fireplace immediately with a soft cloth or towel.
Summary of Contents for 23DE1447 Wall Mantel
Page 1: ...V1 0 F 1 ...
