99042958B
KEY
NO.
PART NO.
DESCRIPTION
1
99110752
Grille Only
2
99140137
Grille Springs (2 Required)
97009346
Grille Assembly (Includes Key
Nos. 1 & 2)
3
99080254
Motor (T050)
4
98006791
Motor Plate
5
99110655
Blower Wheel
6
99260428
Nut #6-32 (2 Required)
7
97008632
Damper/Duct Connector
8
99270748
Receptacle
9
98006773
Wiring Cover
10
99390015
Ground Clip
11
97008319
Housing Assembly
Order replacement parts by part number - not key
number.
1
2
6
3
5
11
9
8
7
4
SERVICE PARTS
6. Install 3" round duct onto damper/duct connector. If rigid ductwork
is used, its seam should be positioned at top of damper/duct
connector. Tape the joint and extend ducting to a wall cap or roof
cap. Make sure the damper operates freely. Ceiling or wall can now
be finished.
7. Replace the motor plate removed in Step 1. Insert two motor plate
tabs into slots in housing and then pivot motor plate up until third
tab on plate snaps into matching slot in housing. Make sure tabs
hold motor plate securely in place. Plug in motor.
8. Squeeze grille springs together and insert springs into slots
in motor plate. Push grille up against ceiling or wall.
Limitation of Warranties and Claims
Seller warrants to the original purchaser that the goods sold hereunder shall be free from defects in workmanship and material under normal use and service (except in those cases where the materials
are supplied by the buyer) for a period of one year from the date of original installation or eighteen (18) months from the date of shipment, whichever occurs first. The liability of seller under this warranty
is limited to replacing, repairing, or issuing credit (at cost, F.O.B. factory and at seller’s discretion) for any part or parts which are returned by buyer during such period provided that:
a. seller is notified in writing within ten (10) days following discovery of such defects by buyer, or within ten (10) days after such defects should reasonably have been discovered, whichever is less;
b. the defective unit is returned to seller, transportation charges prepaid by buyer.
c. payment in full has been received by seller or said products; and
d. seller’s examination of such unit shall disclose to its satisfaction that such defects have not been caused by misuse, neglec t, improper installation, repair, alteration, act of God, or accident.
No warranty made hereunder shall extend to any seller product whose serial number is altered, ef
faced or removed. Seller makes no warranty, express or implied, with respect to motors, switches, controls,
or other components of seller’s product, where such components are warranted separately by their respective manufacturers. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, WHETHER STATUTORY OR OTHERWISE, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event shall
seller be liable to buyer for indirect, incidental collateral, or consequential damages of any kind. (BUYER’S F
AILURE TO PAY THE FULL AMOUNT DUE WITHIN SIXTY (60) DAYS OF DATE OF INVOICE
SHALL OPERATE TO RELEASE SELLER FROM ANY AND ALL LIABILITY OR OBLIGATION ARISING PURSUANT TO ANY WARRANTY, EXPRESS OR IMPLIED, WHETHER STATUTORY OR
OTHERWISE, INCLUDING ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, MADE IN CONNECTION WITH ANY CONTRACT FORMED HEREUN-
DER. BUYER AGREES THAT SUCH FAILURE TO PAY SHALL CONSTITUTE A VOLUNTARY WAIVER OF ANY AND ALL SUCH WARRANTIES ARISING PURSUANT TO SUCH CONTACT.)
TWIN CITY FAN & BLOWER,
5959 Trenton Lane, Minneapolis, MN 55442
