twin busch TWSP245, Installation, Operation, And Parts Manual

Page: 3 / 12

TW-SP245 MANUAL
state: 14.03.2019 page 3 of 12
1.1.3 Safety Instruction
1. Before maintenance pressured parts in the machine, you MUST release the pressure in
the pressured system. At the same time,
DO NOT
stand in the direction facing the charger,
the operator should on the opposite side and remember DO NOT strike, press or transfer
until it is discharged.
2. When it is necessary to exchange die after running, operators should wear glove or use
tools to operate avoid being hurt.
NOTE
: Immediately stop operating the equipment if not working properly. Contact a
certified technical support engineers for repair. The equipment must not be operated
without approval from the certified technical support engineer.
2.Specification
2.1 Application Area
The machinery described is intended for machinery production and assembling spare parts.
It is used to press, size, assemble, rivet small parts in process and not for other use.
2.2 Mechanical part
No. Item Unit Value
1 Capacity Ton 45
2 Stroke mm 190
3 Working Range mm 165~865
4 Gross weight Kg 310
3.Prepare before using
3.1 Transport
The units are generally too heavy to be moved by hand. Therefore, use the correct
transport and lifting equipment.
During moving the machine, please make sure to use the proper lifting equipment and
follow the instructions as follows.