TWIN BUSCH GMBH
Technical changes for purposes of a technical advancement as well as deviation in colour, errors and printing mistakes are reserved.
11
11. Tyre fitting instructions
Attention:
Remove all weights from the rim before you start working with the machine.
11.1 Breaking the bead
Please take care when using the bead breaker, the arm presses with a force of 2500 kg and moves with a great jolt.
This could lead to injury if wrongly operated.
Be sure to let the air completely out of the tyre by removing the valve core before trying to press off the tyre.
Open the arm with the lever by hand and roll the wheel in up to the desired point. Press the rim against the rubber support on
the machine, and place the shoe (Fig. 7) 10mm away from the rim.
Press the bead pedal and the shoe will press against the tyre, repeat this action in various positions on both sides of the
wheel until the tyre is completely free from the rim.
11.2. Clamping the rim
-
Make sure that all weights are removed.
- Clamp the rim using pedal (H), making sure that the wheel is in the middle of the turntable.
-
Press the tyre down with the assistant arm (P) to aid with the lubrication (Fig. 6).
-
Lubricate the tyre and remove.
Fig. 7
Summary of Contents for TW X-11
Page 1: ......