twin busch TW SA 42 U V2, Installation, Operation And Maintenance Manual

Page: 8 / 48

TWIN BUSCH GMBH
Technical changes, errors and printing mistakes are reserved. V01_NK_418_EN
PACKING, STORAGE AND TRANSPORTATION
Packing, lifting, handling, transporting operations must be performed only by experienced personnel with appropriate knowledge of
the lift and after reading this manual.
1. The lift was dismantled into 3 parts for transportation
Name Packed
by
Dimension Weight Quantit
y
Control cabinet Wooden case 510*480*1300 84KG 1
Power side platform Carton with wooden base 5100*700*360 1550KG 1
The secondary platform Carton with wooden base 5100*700*360 1550KG 1
Ramp Bubble film 1300*680*250 106KG 1
2. Storage
The packs must be kept in a covered and protected area in a temperature range 0f -10°to +40°. They must not be exposed to
direct sunlight, rain or water.
Stacking the packs
We advise against stacking because the packs are not designed for this type of storage. The narrow base, heavy weight and
large size of the packs make stacking difficult and potentially dangerous.
If stacking is unavoidable, use all appropriate precautions:
-never stack to more than 2 meters in height.
-never make stacks of single packs. Always stack pairs of packs in a cross pattern so that the base is bigger and the resulting
stack is more stable. Once the stack is complete, restrain it using straps, ropes or other suitable methods.
A maximum of two packs can be stacked on lorries, in containers, and in railway wagons, on condition that the packs are
strapped together and restrained to stop them falling.
3. Lifting and handling
The packs can be lifted and transported only by using a fork lifter . The center of gravity and lashing points are marked on the
packaging. Never attempt to hoist or transport the unit using lifting slings.
Opening the packs
When the lift is delivered make sure that it has not been damaged during transportation and that all the parts specified on the
packing list are present.
Packs must be opened adopting all the precautions required to avoid injury to persons (keep at a safe distance when cutting
the straps) or damage to parts of the machine (be careful that no parts are dropped while you are opening the packing)
Take special care with the hydraulic power unit, the control panel and the platform cylinder.