TWIN BUSCH GmbH
Printing errors, mistakes and technical changes reserved
©by TwinBusch Germany
11
3.10 Measuring head
The wheel aligner is equipped with four measuring heads, which are mounted on the corresponding wheel clamps.
Before attaching the measuring heads, first attach the wheel clamps to the wheels, then insert the axle pin of the
corresponding measuring head into the hole of the central carrier.
After aligning the measuring head horizontally, tighten the adjustment knob on the wheel clamp.
3.10.1 Function of the measuring head
3.10.2 Explanation of the sensor head and the control panel
Control panel:
1. Run out compensation button
2. Reverse button
3. Forward button
4. Enter button
Note: To switch on the measuring head, press any button on the control panel.
A
Battery
B
center-CCD
C
Operation panel
D
Charging socket
E
Front-CCD
1
Measuring head front left
2
Measuring head front right
3
Measuring head rear left
4
Measuring head rear right
Summary of Contents for TW 115
Page 1: ......