manualshive.com logo in svg

twaudio VERARF600i, Assembly Instructions Manual

Share
Download
twaudio VERARF600i Assembly Instructions Manual Download Page 3

VERA RF600i Assembly Instructions

3

  Notes on the products 

Read manual

before use!

Before using the rigging frame, carefully read the assembly instructions and keep the instruc-
tions in a safe place together with the VERA RF600i rigging frame.

  General information 

Assembly Instructions:  AM-VERA RF600i 
Version 1.4 d, 08/2020 
© by TW AUDiO 2020; all rights reserved.

All information contained in this assembly guide was correct to the best of our knowledge at 
the time of printing.

Quality warranties or assurance of suitability for a certain type of use based on the technical 
specifications, dimensions and weights are not granted by TW AUDiO.

TW AUDiO also shall not assume liability for any secondary damage (property damage and/
or personal injury) nor for the failure to comply with this assembly guide!

TW AUDiO reserves the right to update this document based on recent developments.

TW AUDiO  GmbH 
Osterholzallee 140 
71636 Ludwigsburg
Germany

Phone:  + 49 (0) 71 41-48 89 89 0
Fax:       + 49 (0) 71 41-48 89 89 99 
E-Mail:   [email protected] 
WWW:   www.twaudio.de

Summary of Contents for VERARF600i















































Reviews:

No comments

Brands by name

Popular brands

Load more brands