Assembly Instructions QBT20
10
4.4 Assembly QBT20 swivel bracket to trusses, ceiling or wall
For installation purposes, attach the QBT20 swivel bracket to the ceiling or wall by using all
three holes located on the crossbar. Make sure that you use suitable fastening material and
that the connections are set firmly and correctly!
WARNING
Figure 4.4 - Assembly QBT20 with T20 to ceiling
4.3 Assembly QBT20 to loudspeaker
Figure 4.3 - Assembly QBT20 to T20 loudspeaker
Mount positions 1 to 3 (see figure 2.1) on both sides as shown in figure 4.3. Note that at
pos.4 (see figure 2.1) one of the side holes is used.
NOTE
T20
Pos.4
Pos.2
Pos.1
Pos.3
WARNING
Attach the DHST Doughty Halfcoupler Slimline to the ø12.2mm hole located on the crossbar
of the QBT20 swivel bracket when using the QBT20 swivel bracket on trusses. Make sure that
the connections are set firmly and correctly!
