TW Steel TW-525, User Manual

Page: 38 / 93

34
4.3.4 WPS-Wi-Fi Protected Setup
WPS feature is designed to ease security setup and enabled WiFi networks in small offices or
home. It helps you to set a network and enable security by entering a PIN or pushing the WPS
button.
WPS Config
● WPS Service: Default setting is Disable. If you want to activate this function, please select
Enable and click Apply to confirm the setting.
● WPS mode: There are two methods to connect the network via WPS between AP and Stations:
PIN code or PBC.
♣ PIN: Select PIN ( Personal Identification Number ) mode to connect to the device.When PIN
mode is selected, it allows you to enter the PIN code or select Enrollee to use the default PIN code
(00000864) which the device uses to authenticate other WPS-enabled wireless devices.
♣ PBC: Select PBC (Push Button Communication) mode to connect to the device.
Note: You can enable WPS PBC mode through WPS configuration interface as above or by
pushing the WPS button of your Wall Plug Ethernet Access Point for more than 2 seconds
and release it. The WPS will establish the wireless connection automatically after the
wireless station also start WPS PBC process.
● Click Apply to save the change.