TW Steel TW-525, User Manual

Page: 33 / 93

29
Bridge Mode
● Bridge Mode: Select Bridge Mode from the WDS Mode drop-down menu. In this case, AP
will not send beacon out and deal with probe request packets , so that wireless client will not be
possible to connect with this device. The device can use complete bandwidth of WDS connection.
● AP MAC Address: AP MAC Addresses are displayed in WDS Bridge and Repeater Mode.
When Pressing WPS button, other WDS AP MAC Address(es) will be automatically detected and
displayed on this section. There are totally four MAC Adresses can be detected at one time. It is
important that all of the AP's channel must be the same in WDS to acknowledge and communicate
with each other.
Note: Please note that the AP MAC address can not duplicate the AP Client.
Repeater Mode
● Repeater Mode: Select Repeater Mode from the WDS Mode drop-down menu. In this case, The
packets can be forwarded to other AP(s) via WDS connections. Here, AP functions similarly as that
in Lazy Mode. When Pressing WPS button, other WDS AP MAC Address(es) will be automatically
detected and displayed on this section. There are totally four MAC Adresses can be detected
at one time. The Repeater Mode can establish the connection with other AP(s), and the wireless
client(s) can be connected the device too.