Operation manual VERA20
2
Introduction
Thank you for choosing a high-quality product “MADE IN GERMANY” from TW AUDiO.
The VERA20 loudspeaker is equipped with two 10” chassis for the low-mid frequencies and
a waveguide with a 1.4” mid-high compression driver. Compared with typical double
8” systems, the VERA20‘s two 10” drivers are capable of reproducing up to 6 dB more
output in the low-mid frequency range with lower distortion.
Thanks to the loudspeaker’s width (only 60 cm / 23.62 inches) and height (28 cm /
11.02 inches), vertical arrays of up to 24 elements may be constructed.
The newly developed 1.4” compression driver and waveguide provides smooth and accurate
midrange performance for natural vocal and music reproduction. The low frequency
crossover point around 1
kHz guarantees precise and uniform coverage even in the sensitive
transition range. The extraordinarily fast transient response ensures that high frequency
reproduction is detailed and crisp.
The VERA20 implements an outstandingly innovative rigging hardware, allowing
straightforward, fast and cost-efficient setup and dismounting by just one technician. A
special feature is logarithmic scaling of the intermediate angles between angles. This allows
for angle adjustment of less than one degree to achieve more accurate directivity of upper
array elements over longer distances.
If you lend your product to another party, inform that party of the safety-related operating
procedures and hand over this operating manual. If you require additional copies of this
manual, you can obtain them free of charge from TW AUDiO or download them from:
www.twaudio.de
Notes in the user manual
Strictly adhere to the instructions contained in this operating manual that are marked as
follows:
This symbol in combination with the signal word “Warning” identifies a potentially
hazardous situation. Failure to comply with this safety instruction can lead to serious injury
or even death.
WARNING
This symbol in combination with the signal word “Warning” identifies a potentially
hazardous situation for persons with pacemakers. Failure to comply with this safety
instruction can lead to serious injury or even death.
This symbol in combination with the signal word “Caution” identifies a potentially
hazardous situation. Failure to comply with this safety instruction can lead to light or
moderate injury.
Summary of Contents for VERA20
Page 1: ...VERA20 Operation manual...
