Operation manual VERA20
12
4.5.
Connecting cables
Ensure that the cable cross sectional area is sufficient (at least 1.5 mm²) to avoid power
losses. TW AUDiO recommends using the loudspeaker cables available from TW AUDiO.
When connecting the cables to the loudspeaker, ensure that polarity (+/-) and pin
assignment (1/2) are correct. Incorrect connection can lead to a significant change in the
loudspeaker’s sound characteristics and may damage the compression driver.
The pin connections of the VERA20 loudspeaker can be found in section 3.2 (“Wiring
diagram”) on page 9.
The two connectors on the back of the VERA20 loudspeaker make it possible to connect
several loudspeaker units in parallel.
Please note that parallel connections will decrease the total impedance of your loudspeaker
configuration.
The total impedance and the resulting power of the speaker configuration must match the
output power of the amplifier.
Summary of Contents for VERA20
Page 1: ...VERA20 Operation manual...
