TVU One TM1000 v2 in V6.0 Set Up and Operating Guide
Page 48 of 49
Figure 48 AutoSync screen
8.
Drag and drop files to be transferred into the AutoSync folder (Figure 47).
A
PPENDIX
D:
A
UTOMATIC
I
NGESTION OF
USB
M
EMORY
S
TICK
C
ONTENT TO
TVU
O
NE
You can wirelessly transmit digital content from the TVU One transmitter to the TVU Re-
ceiver. To do so, simply place the content on a USB memory stick and then connect the
stick to the spare USB port on the TVU One encoder unit. TVU One will auto-detect the
memory stick and automatically transfer the contents to its internal SSD hard drive. The
content will then be available for wireless transmission to the TVU Receiver. Please
note that the supported disk format is FAT32 only.
Take the following steps to transfer content from a USB memory stick to TVU One:
1.
Create a directory named "autosyncimport" in the memory stick.
2.
Copy the content you want transferred into the "autosyncimport" directory.
3.
Plug the memory stick into any to the spare USB port on the TVU One encoder
unit.
4.
Monitor the status of the file upload on the TVU One's LCD screen. Do not un-
plug the USB memory stick during the file upload as this may cause the system to
malfunction.
A
PPENDIX
E:
L
OCAL
D
OWNLOAD OF
R
ECORDED
C
ONTENT TO A
USB
M
EMORY
S
TICK
By connecting a USB memory stick (FAT32 only) to a TVU One transmitter while the vid-
eo source is disconnected, the entire video content of the last session will be transferred
to the memory stick in an NLE compatible format.
Additionally, on the web-based monitoring and controls interface, the Recording tab (A)
will lists the recorded sessions on the SSD that are available for download (Figure 49).
