TVU One TM1000 v2 in V6.0 Set Up and Operating Guide
Page 39 of 49
Figure 42 IP Status Screen
E.
Your Ethernet connection should now be ready to use.
Configuring a Wi-Fi Connection via Command Text
To configure the TVU Transmitter to connect to a wireless network through command
text, follow these steps:
1.
Make sure the wireless USB card is present on USB slot 10, which is on the side
of TVU One encoder unit.
2.
Connect a USB keyboard to one of the USB ports on the side of the TVU One en-
coder unit.
3.
From the TVU Transmitter status screen, type "tvu" in lower case and press Enter
on your keyboard to display commands. Follow these steps to establish a con-
nection:
Note: All typed commands are case sensitive.
A.
Type WIRELESS in the command line and press Enter to see a list of com-
mand options:
