TVT Digital Smart Management Terminal, User Manual, Page: 29 / 137

Wizard & Main Interface SMT User Manual
21
Here we take Camera module as an example. The Camera module provides convenient links
such as ―Add Camera‖, ―Edit Camera‖, ―Image Settings‖, ―OSD Settings‖ and ―Motion
Settings‖. Click
Camera to go to the camera management interface as shown below.
Click the main menus on the top of the camera management interface to go to corresponding
interfaces. Refer to the picture below. For instance, you can go to system setup interface by
clicking ―System‖ tag.
3.2.3 Main Functions

Camera
The module covers the functions such as Camera Management (see Chapter 4 Camera
Management for details), Image Settings (see 5.2 Preview Image Configuration for details) and
Motion (see 12.4 Motion Configuration for details)

Record
The module covers the functions such as Encode Parameters and Record Schedule and so on.
Please see Chapter 10 Record & Disk Management for details.

AI/Event
The module covers the functions such as Body Temperature Settings, Mask Settings, Flow
Control, Event Notification, Combination Alarm, Exception, Sensor and Motion Alarm ,
Alarm Out Settings , etc. Please see Chapter 12 AI/Event Managementfor details.

Disk
The module covers the functions such as Disk Management , Storage Mode and Disk
Information and so on. Please see Chapter 10 Record & Disk Management for details.

Network
The module covers the functions such as TCP/IP , DDNS , Port , E-mail and Network Status
and so on. Please see 14.1 Network Configuration for details.

Account and Authority
The module covers the functions such as Account Management (see13.1 Account