2. After setting up the slack, hold the nut regulator at
the same position, the locking nut key setting.
3. Check the clutch performance in the following
ways.
a. Position the motor with a standard middle on a
flat surface.
b. Put gear into-1.
c. Press the clutch hand lever and at the same time
turn the rear wheels, if the wheels can be rotated
easily by hand then the adjustment is correct.
d. If the wheel can not be rotated easily by hand (like
a lock) signifies to do further tests. Contact
Dealer / workshop tvs TVS.
Clutch lever clearances that are too loose or too tight
will damage the clutch plate, thus affecting the
performance of the vehicle.
Pelongggaran clutch cable should be set only when
the engine is cold.
ATTENTION
REAR SHOCK ABSORBER
ZT 125 equipped with a three-part shock
absorber, adjustable 5 level, please be adjusted
to cope with different road conditions and load.
Rear spring shock absorber settings
Keep the controller left and right shock absorber in
the same position.
ATTENTION
MAINTENANCE
32
