Trip meter registers and displays the partial
distance covered in kilometers. The digit after
the dot mark denotes one tenth of a kilometer.
Set the display in ‘TRIP’ mode to know the
reading. Press the mode switch for a few
seconds (in ‘TRIP’ mode) to reset trip meter
whenever required.
Digital clock displays the time only in 24 hours
format. Set the display in ‘CLOCK’ mode to
display the time by pressing the mode switch.
Digital clock setting
Digital clock can be set in ‘CLOCK’ mode only.
Set the digital clock time in the following
manner.
1. Change the meter to ‘CLOCK’ mode by
pressing the mode switch button.
KNOW YOUR TVS WEGO Fi
2. Press the mode switch till the hour digits of
the clock starts blinking.
3. Once the hour digits started blinking, press
the mode switch again to increase the hours.
4. Press the mode switch till the minute digits of
the clock starts blinking.
5. Once the minute digits started blinking, press
the mode switch again to increase the
minutes.
6. Long press of the mode switch again exits the
clock setting.
b. Speedometer
Digital bars displays the driving speed in
kilometer per hour (km/h) in real time. Each bar
indicates 2 km/h.
-13-
KNOW
YOUR
TVS WEGO Fi
Summary of Contents for WEGO 110 Fi
Page 1: ...OWNER S MANUAL E X P O R T...
