28
3. Adjustable clutch lever
Use the clutch lever to disengage the drive to the rear
wheel while shifting the gears. Squeezing the lever
towards grip disengages the drive.
4. Pass-by switch
Press the switch to flash the head lamp high beam. It
is used to give signal to the vehicles coming from the
opposite direction while overtaking other vehicles
during day.
The pass-by works only when the head lamp is
glowing in low beam. If the switch is pressed while
the head lamp is switched ‘ON’ and glowing in high
beam, there will be no change in beam of head lamp.
5. Beam control switch
The head lamp beam (low/high) can be controlled by
pressing the beam control switch.
Press the switch towards ‘ ’ to turn-on the head
lamp high beam or press the switch towards ‘ ’ to
turn-on the head lamp low beam.
Use appropriate head lamp beam ‘high / low’ as per the
traffic and road conditions for your safety and to avoid
inconvenience to other riders.
Warning
Pass by system will not work if the head lamp is glowing
in ‘High’ beam.
Clutch lever position can be set to your convenience.
Refer page no. 49 for details.
The head lamp glows automatically in ‘low/high’ beam
based on the position of beam control switch once the
engine is started.
Note
