TVS Racing Apache RTR 160, Manual

Page: 42 / 119

36
Whenever the vehicle speed crosses the previously
achieved high speed, a message ‘ACHIEVED HIGH
SPEED’ will be popped-up and a trophy symbol will
be flashed to cheer your achievement when the
vehicle reaches to a safer low speed.
If required, these pop-ups can be cancelled by
pressing the ‘Info switch ( )’ on the handle bar else
it will disappear automatically.
Maximum speed recorded so far will be displayed
whenever the meter is set in ‘HIGH SPEED’ mode.
This display will go off automatically once the vehicle
starts moving (>3 km/h) and it will continue the normal
operation.
Max speed recorded will be stored until manual reset. If
the high speed is reset, the speed value will be shown
as ’0’.
Note
13f. Shortest time indicator
Shortest time indicator records the minimum time
taken so far to reach 60 km/h or 40 mph speed
(according to the preferred setting).
On entering the shortest time mode, the overall
best time achieved so far will be displayed for few
seconds as shown.
And the last recorded time will be displayed in the
shortest time recorder as given below.
This last recorded time can be reset as explained
in page no. 43 and a new time can be recorded
if required. The overall best time will be replaced
automatically by the next overall best time. On
achieving the new overall best time, a message
‘ACHIEVED SHORTEST TIME’ will be popped-up
and a trophy symbol will be flashed to cheer your
achievement when the vehicle reaches to a safer low
speed.