51
Tyre rotation direction
While reassembling the tyre on the wheel rim, please
ensure the following:
1. The front tyre (indicated by ‘FOR FRONT
FITMENT’ on the tyre) should not be assembled
to rear wheel rim.
2. The arrow mark on the tyre should match the
actual direction of rotation of wheel (both front
and rear wheels).
Tyre puncture
Your scooter is fitted with a tubeless tyre on both
front and rear wheel. Incase of any puncture /
tyre damage, it is advised to visit the nearest tyre
manufacturer Dealer or the tyre repair shops who
knows the repairing method of tubeless tyre.
It is not necessary to remove the tyre from wheel
rim always to attend a puncture, Even though it there
is need of tyre removal, it is strongly recommended
to use a tyre removal / fitment machine. If at all,
tyre levers needs to be used, the levers should be
free from sharp edges. Care should be taken not to
damage the tyres and rims.
The tyre inflation pressure in cold condition and the
tyre tread condition are extremely important for the
performance and safety of the rider. Check the tyres
frequently for inflation pressure as well as the wear
pattern on it. Use of a tyre other than the standard may
cause instability.
Warning
A
FOR F
RON
T F
ITM
EN
T
TW
I
The side walls of the tubeless tyre which in contact with
the wheel rim are only seals the air inside the wheel
assembly. Hence care should be taken not to damage
the side walls of the tyres during removal / reassembly.
Caution
