43
43
SMS alert display ‘ ‘
The connected instrument cluster displays the
incoming SMS from the smart phone via Bluetooth
Ex. ‘SMS FROM AMIT’. The sender name of the
incoming SMS will be displayed in the connected
instrument cluster only if the number is stored in the
contact list of the smart phone.
Set clock mode
To enter the set clock mode, press ‘Mode’ button
for more then 5 secs in Bluetooth paring mode.
The digital clock starts blinking once the connected
instrument cluster enters the set clock mode.
• The hour digits of clock starts blinking and
enables you to change the hours.
• Press the ‘Mode’ button to increase the hours
while hour digits are blinking.
• On pressing the ‘Set’ button again the hours gets
set and the minute digits starts blinking.
Number of missed calls (inclusive of user rejected calls)
will be displayed at the end of each incoming call and it
will be reset once a trip is completed and a trip report is
generated in app or if app is closed.
Note
The SmartXonnect Notification LED (green LED) blinks
for five seconds approximately whenever there is a
incoming message.
SMS alert display is not applicable for iPhones.
Note
