KNOW YOUR TVS JUPITER FI
KNOW
YOUR
TVS
JUPITER FI
-14-
Always use the appropriate turn signal lamps when
you intend to change lanes or take turns. Be sure to
switch ‘OFF’ it after negotiating the lanes or turns.
Warning
9. Malfunction Indicator Lamp
During switching ON the Ignition key, MIL ‘ ’ will
glow until the Healthy engine Start. After 10 secs. of
Engine start, MIL will switch OFF.
If the MIL ‘ ’ glows continuously even after 10
secs. of engine start, Immediately contact nearest
TVS Motor Company Authorised Distributor or Dealer
/ Authorised Service Center.
HANDLE BAR LEFT SIDE
1. Horn switch
Press the switch ‘ ’ to operate the horn.
2. Turn signal lamp switch
Slide the turn signal lamp switch to left ‘ ’ or right
side ‘ ’ to operate respective turn signal lamps (LH
/ RH). Press the switch to turn ‘OFF’.
3. Rear brake lever
The rear brake is applied by squeezing the rear brake
lever gently towards the handle grip. The brake lamp
glows on application of rear brake.
4. Rear brake lock lever
Rear brake lock is useful when your scooter is parked
with side stand on a slope to avoid falling.
To apply the rear brake lock, squeeze the rear brake
lever fully towards the grip as much required, by
holding it as it is press and hold the brake lock lever.
Now release the brake lever and ensure the brake is
locked properly.
1
2
5
3
4
