background image

The maintenance schedule indicates the intervals between periodic services. At the end of each interval, be sure to 
inspect, check, replace, adjust, lubricate and service as instructed. If the maintenance is not done periodically, it will 
result in rapid wear and severe damage to the vehicle. If the vehicle is used under high stress conditions such as 
continuous full throttle operation or is operated in dusty area, certain jobs should be performed more often to ensure 
reliability of the vehicle. Cylinder head, steering components, suspension, chain and wheel components etc., are key 
items and require very special and careful servicing. TVS Motor Company Limited strongly recommends that the jobs as 
per the maintenance schedule be performed by your TVS Motor Company Authorised Distributor or Dealer / Authorised 
Service Center.

MAINTENANCE SCHEDULE

Periodic  inspections  may  reveal  one  or  more  parts  that  may  need  replacement.  Whenever  replacing  parts  on               
TVS Apache RTR 200 4V, it is recommended that you use only the TVS Motor Company Genuine parts.

In more dusty areas, the air filter element required early replacement than the mentioned kilometers to avoid costly 
damages to the engine. 

Proper running-in and maintenance are mandatory for making certain that your vehicle is reliable and gives optimum 
performance at all times. Make sure that the periodic maintenance is performed thoroughly in accordance with the 
instructions given in this owner's manual.

MAINTENANCE

60

Caution

Summary of Contents for Apache RTR 200 4V 2021





























































































Reviews: