11e. High speed indicator
High speed indicator records the maximum speed
(top speed) achieved by the rider so far either in km/h
or mph as per preferred setting. You can reset and
record the new speed if required. Refer page no. 27
for resetting the high speed data. On entering th high
speed mode previously achieved high speed data will
be displayed in the instrument cluster as shown.
11f. Shortest time indicator
Shortest time indicator records the minimum time
taken so far to reach 60 km/h or 40 mph speed
(according to the preferred setting).
On entering the shortest time mode, the overall best
time achieved so far will be displayed for few seconds
as shown.
KNOW YOUR TVS APACHE RTR 200 4V
Whenever the vehicle speed crosses the previous
achieved high speed, a message ‘ACHIEVED HIGH
SPEED’ will be popped-up and a trophy symbol will be
flashed to cheer your achievement when the vehicle
reaches to a safer low speed.
These pop-ups can be cancelled by pressing the ‘Info
switch’ ( ) on the handle bar else it will disappear
automatically.
And the last recorded time will be displayed in the
shortest time recorder as given below.
21
Maximum speed recorded so far will be displayed
whenever the meter is set in ‘HIGH SPEED’ mode.
This display will go off automatically once the vehicle
starts moving (>1 km/h) and it will continue the normal
operation.
Max speed recorded will be stored until manual reset.
If the high speed is reset, the speed value will be
shown as ’0’.
Note
