26
Using the Photo Viewer
The Photo viewer function, allows you to view photos from devices, such as, Digital still cameras
(DSC), USB Card readers and USB Flash drives.
Operating the Photo Input
Prepare the Photo input equipment as follows:
1.
Digital Still Camera:
Set up according to the instructions for “connecting to PC” in the camera’s User’s Manual.
USB Card Reader:
Insert only one memory card.
USB Flash Drive:
No preparation required.
Connect the USB cable or USB Flash drive to the Photo input socket
2.
q
. Alternatively you can
use the USB socket on the back panel.
Select Photo input mode (see page 13). If connecting a camera, turn it On, as instructed in the
3.
camera’s User’s manual.
Refer to page 27 for the operation of the viewer / slide show.
4.
To prevent possible loss of data, use the
5.
[INPUT]
button on the remote control to switch out of
Photo input mode and switch Off the USB device before removing it.
Note:
Do not connect any apparatus other than a DSC, USB Card reader or USB Flash drive to the Photo input socket. It may
•
cause a malfunction.
Do not connect a DSC, USB Card reader or USB Flash drive using a USB Hub. Pictures may not be displayed correctly, or
•
may cause a malfunction.
Certain types of DSC may not work with this Photo Viewer function.
•
q
DTR-HV250 User Guide V2.indb 26
10/12/09 16:47:03
