5
tvONE
Predefined EDID setting
If you have a MG-DA-618, switch the 3-pin DIP on the front panel to PRESET, and then use the 4-pin DIP
switch on the rear panel to set the EDID to a built-in fixed value.
If you have a MG-DA-612 or a MG-DA-614, use the 4-pin front DIP switch only.
The switch represents
0
when in the lower (
OFF
) position, and
1
when in the upper (
ON
) position.
Switches 1-3 are used for EDID setting.
The DIP switch status and its corresponding setting are shown on the base of the product.
Use the following table to determine the settings for the 4-pin DIP switch for specific video resolution and
audio capabilities.
Switch Status
Video Resolution
Audio Format
000
Obtains EDID from the first detected display starting at HDMI output 1>2>3>4
001
Obtains EDID from the first detected display starting at HDMI output 4*>3>2>1
010
1080P
LPCM
011
1080P
DTS/Dolby
100
3840x2160@30Hz HDR
LPCM
101
3840x2160@30Hz HDR
DTS/Dolby
110
3840x2160@60Hz HDR
LPCM
111
3840x2160@60Hz HDR
DTS/Dolby
*MG-DA-618 starts at output 8>7>6>etc
Front DIP switch for MG-DA-612 and MG-DA-614, rear DIP switch for the MG-DA-618
