
8
7.0
OPERATING THE UNIT
The LM-1511R and LM-1911R monitors are operated using front panel controls and an
On Screen Display (OSD). The controls consist of a group of six buttons located on the
lower center of the front panel. Please refer to illustration below and the discussion that
follows.
Power Switch
: Pressing the button labeled ‘POWER’ will cause the LED at the extreme
right of the control panel to change color from Red to Green and power will be applied
to the monitor’s circuitry. Pressing the button again will cause the LED to glow with a
Red color and the power will be removed from the Monitor’s circuitry.
Warning: As long as the AC lead is plugged in, potentially lethal voltage is present
inside the unit. Never attempt to disassemble the unit while power is applied.
Mount the monitor in a rack or extend the
unit’s rear support arm for desktop
operation. Use care with the support arm
since small angles between the rear of
the monitor and the support arm could
result in the monitor falling forward onto
its face resulting in possible damage.
Allow a heat dissipation area behind the
monitor so that the normal operating heat
from the LCD displays internal lighting
system can be vented to the atmosphere.
After taking the above steps, refer to the
drawing at the right and connect the AC
lead plus the appropriate input cables to
the unit using the drawing as a guide.
Use only high quality signal cables to
produce the best images and remember
that the longer the cable runs the more
degradation of the signal.
Warning: If the supplied AC cable is
incorrect for your country, contact TV One
immediately for a replacement. Do Not
Attempt to Use An Incorrect AC Cable.
Summary of Contents for LM-1511R
Page 1: ...Instruction Manual LM 1511R and LM 1911R Color LCD Rackmount Monitors ...
Page 2: ......
Page 9: ...7 ...