7
1. Connect the HDMI source
GHYLFH¶V
output to the HDMI IN connector of the 1T-
CT-641 Transmitter, using an appropriate HDMI cable, (10 Meter
(~30
¶
in length
IRUELWVLJQDOVPHWHUVa¶
) for 8 bit signals).
2. (OPTIONAL) If there is an IR controllable device on the 1T-CT-641 side that you
wish to control remotely from the 1T-CT-642 side, connect the IR emitter to the
IR1 OUT connector on the 1T-CT-641. If there is an IR controllable device on the
1T-CT-642 receiver side that you wish to control remotely from the 1T-CT-641
side, connect the IR receiver to the IR2 IN connector on the 1T-CT-641.
3. Connect the Cat.5e or Cat.6 cable to the transmitter via the RJ45 connector.
Ensure that the RJ45 connector achieves
DSRVLWLYHORFNLQWRWKHWUDQVPLWWHU¶V
connector.
4. C
RQQHFWWKH$&SRZHUDGDSWHU¶V
screw lock DC power connector to the
transmitter. The green LED on the RJ45 port will illuminate when power is
present.
4.3
1T-CT-642 Receiver
1. At the remote location, connect the Cat.5e/Cat.6 cable to the
UHFHLYHU¶V
RJ45
connector. Ensure that the connector achieves a positive lock into the receiver
¶
s
connector.
2. (OPTIONAL) If there is an IR controllable device on the 1T-CT-642 side that you
wish to control remotely from the 1T-CT-641 side, connect the IR emitter to the
IR2 OUT connector on the 1T-CT-642. If there is an IR controllable device on the
1T-CT-641 side that you wish to control remotely from the 1T-CT-642 side,
connect the IR receiver to the IR1 IN connector on the 1T-CT-642.
