24 Reference Monitor
Reference Monitor 25
[7] WAVEFORM
5. Menu Operations
●
RANGE ERROR
- Used to display the values of Y MAX, Y MIN, C
MAX, C MIN, Y PICTURE BLINK and C PICTURE
BLINK on the screen.
- Selected values in Y MAX, Y MIN, C MAX, C
MIN are indicated in WAVEFORM/VECTOR or
Y/Cb/Cr.
- If Y PICTURE BLINK or C PICTURE BLINK is
enabled, the section of image that exceeds
the selected values of Y MAX, Y MIN, C MAX
and C MIN blinks.
* In the case of RGB input, Range Error is not
supported.
●
Y MAX
- Used to set the maximum luma(Y’) level from
1 to 254.
- Pixels with values exceeding the max Y’ level
will blink in the screen, and display in red on
the Waveform.
●
Y MIN
- Used to set the minimum luma(Y’) level from
1 to 254.
- Pixels with values exceeding the min Y’ level
will blink in the screen, and display in red on
the Waveform.
●
C MAX
- Used to set the maximum chroma(C’) level
from -127 to 126.
- Pixels with values exceeding the min C’ level
will blink in the screen, and display in red on
the Waveform.
●
C MIN
- Used to set the minimum chroma(C’) level
from -127 to 126.
- Pixels with values exceeding the min C’ level
will blink in the screen, and display in red on
the Waveform.
XVM-177A
SDI A
PAGE II >> PAGE I
RANGE ERROR
Y MAX
Y MIN
C MAX
C MIN
Y PICTURE BLINK
C PICTURE BLINK
OFF
127
1
127
1
OFF
OFF
●
Y PICTURE BLINK
- Used to trigger selections of image that
exceeds Y MAX and Y MIN to blink.
●
C PICTURE BLINK
- Used to trigger selections of image that
exceeds C MAX and C MIN to blink.
[8] AUDIO
5. Menu Operations
●
LEVEL METER SELECT
- Used to control the Embedded Audio Level
Meters.
- Available modes are OFF, G1+G2, G2+G3,
G3+G4, G1+G3, G1+G4,G2+G4 and 16CH.
- If Main Menu window activates, the level
meter displays semi-transparent even if
[LEVEL METER SIZE] menu is set to Normal.
It returns to normal when the Main Menu
window is deactivated.
●
LEVEL METER DISPLAY
- Used to control display method of Audio
Level Meters.
- Available modes are Pair and Group.
●
LEVEL METER REFERENCE
- Used to set audio level default.
- Available values are -18dB and -20dB.
- Audio within selected value is displayed in
green and exceeded audio level is displayed
in yellow.
- Audio exceeding -4dB is displayed in red.
●
LEVEL METER DECAY TIME
- Used to set the reduction time of the
maximum indication of audio signals.
- Available values are form 0 to 31. Larger
values indicate a longer time to display.
●
LEVEL METER SIZE
- Used to control the size of the Audio Level
Meters.
- Available modes are SMALL, SMALL TRANS,
NORMAL, NORMAL TRANS, LARGE and
LARGE TRANS.
- In SMALL, NORMAL and LARGE modes, the
Audio Level Meter appears opaque.
- In SMALL TRANS., NORMAL TRANS and
LARGE TRANS modes, the Audio Level Meter
appears semitransparent.
XVM-177A
SDI A
LEVEL METER SELECT
LEVEL METER DISPLAY
LEVEL METER REFERENCE
LEVEL METER DECAY TIME
LEVEL METER SIZE
LEVEL METER POSITION
VOLUME
Em. AUDIO LEFT
Em. AUDIO RIGHT
OFF
PAIR
-20dB
O
SMALL
HOR.
MIN
OFF
OFF
●
LEVEL METER POSITION
- Used to control the position of the Audio
Level Meters.
- Available values are HOR, VER and BOT.
*16 CH(HOR.): Displays each 8 channel audio
level meter horizontally on top left and right.
*16 CH(VER.) : Displays each 8 channel audio
level meter vertically on center left and right.
*16 CH(BOT.) : Displays each 8 channel audio
level meter vertically on bottom left and
right.
●
VOLUME
- Used to control the embedded audio output
volume for the internal speakers of the
monitor.
- Available values are between 0 ~ 30.
●
Em. AUDIO LEFT
- Used to set embedded audio channel for
right audio out of internal speaker or [AUDIO
OUT] terminal on the front of the monitor.
- In HDMI mode, HDMI audio output.
- In COMPOSITE, S-VIDEO, COMPONENT, RGB,
DVI ANALOG and DVI DIGITAL modes, the
audio signal that is connected with [AUDIO
IN] terminal input on the front of the monitor
output.
- Available values are between CH1~CH16
and OFF.
●
Em. AUDIO RIGHT
- Used to set embedded audio channel for left
audio out of internal speaker or [AUDIO OUT]
terminal on the back of the monitor.
- In HDMI mode, HDMI audio output.
- In COMPOSITE, S-VIDEO, COMPONENT, RGB,
DVI ANALOG and DVI DIGITAL modes, the
audio signal that is connected with [AUDIO
IN] terminal input on the back of the monitor
output.
- Available values are between CH1~CH16
and OFF.
