14 Multi Format LCD Monitor
Multi Format LCD Monitor 15
5. Menu Operations
●
BRIGHT
- Used to set the brightness(=offset) level from
-100 to 100.
●
CONTRAST
- Used to set the contrast(gain) level from -100
to 100.
●
CHROMA
- Used to set the saturation level from -50 to
50.
●
APERTURE
- Used to set the sharpness level from 0 to 25.
●
BACK LIGHT
- Used to control the backlight level of the
LCD panel from 0 to 200.
●
BLUE ONLY
- Activates in the order of [Off]-[Blue Only]-
[Mono]-[Off]
- Press the button to remove red and green
from the input signal and display the screen
only under a blue signal. Press the button
again to activate mono mode.
●
USER ASPECT HORIZONTAL
- Used to set the aspect ratio of HORIZONTAL
value.
- Control Range:
SWM-170A : 910 ~366 / SWM-240A/320A/
420A/460A/550A : 1280 ~ 1920
●
USER ASPECT VERTICAL
- Used to set the aspect ratio of VERTICAL
value.
- Control Range:
SWM-170A : 512 ~ 768 / SWM-240A : 800 ~
1200 / SWM-320A/420A/460A/550A
: 720 ~ 1080
[1] PICTURE
SWM-170A
SDI A
BRIGHT
CONTRAST
CHROMA
APERTURE
BACK LIGHT
BLUE ONLY
USER ASPECT H
USER ASPECT V
0
0
0
MIN
100
OFF
1366
1366
[5] Menu Tree
4. Menu Tree & Adjustment
MARKER
MARKER
MARKER DISPLAY
CENTER MARKER
SAFETY AREA
FIT MARKER
MARKER MAT
MARKER COLOR
MARKER THICKNESS
USER MARKER H1
USER MARKER H2
USER MARKER V1
USER MARKER V2
AUDIO
LEVEL METER SELECT
LEVEL METER DISPLAY
LEVEL METER REFERENCE
LEVEL METER DECAY TIME
LEVEL METER SIZE
LEVEL METER POSITION
SYSTEM
USER CONFIG SET
SERIAL NUMBER
OSD DISPLAY
OSD POSITION
INTERNAL PATTERN
SET DEFAULT
SIGNAL LOCK
KEY LED
F1/DOWN MAPPING
F2/UP MAPPING
DEVICE
COLOR CALIBRATION
TARGET LUMINANCE
K-10 CHANNEL
COLORSPACE
CALIBRATION START
MEASUREMENT
KEY LOCK
COPY DATA
S/W UPGRADE
INFO.
BOARD VERSION
SUB VERSION
BRIG
CONT.
COLOR
SCAN
ALM
C.C
T.C
1080/60i
