22 Multi Format LCD Monitor
Multi Format LCD Monitor 23
[5] GPI
[5] GPI
5. Menu Operations
5. Menu Operations
Bit 1
(Tally2)
Bit 1
(Tally1)
Operation
0
0
CHANNEL1
0
1
CHANNEL1
1
0
CHANNEL1
1
1
CHANNEL1
Bit 1
(Tally4)
Bit 1
(Tally3)
Operation
0
0
CHANNEL1
0
1
CHANNEL1
1
0
CHANNEL1
1
1
CHANNEL1
The following appearance of UMD DISPLAY is set as D-UMD(D-8C), D-UMD TALLY TYPE
and TALLY1 ~ TALLY4 COLOR.
D-UMD TALLY TYPE USER COLOR
TALLY1 COLOR
RED
TALLY2 COLOR
GREEN
TALLY3 COLOR
RED
TALLY4 COLOR
YELLOW
CHANNEL1
CHANNEL1
●
Tally Type - Default
- S-8C(Single 8 Character) & S-16C(Single 16 Character)
●
D-UMD TALLY TPYE – USER COLOR
- Color selections between TALLY1 ~ TALLY4.
- D-8C(Dual 8 Character)
<Dynamic UMD Protocol (TSL V3.1)>
* Transmission (Ethernet) (Maximum packet length 2048 Byte) (PC or Device or Monitor)
* [DLE] : 0xFE
* [STX] : 0x02
* [PBC] : Total byte count of following packet.
* [VER] : Minor version number (e.g. V5.00, VER = 0).
* [FLAGS]
bit 0 : Clear for ASCII based strings in packet, set for Unicode UTF-16LE.
bit 1 : If set, data after SCREEN is screen control data (SCONTROL) – otherwise
it’s display message data (DMSG).
bit 2-7 : Reserved (clear to 0).
(Not used)
* [SCREEN] : Primary index for use where each screen.
Index 0xFFFF is reserved as a “Broadcast” to all screens.
If not used, set to 0.
* [INDEX] : The 0 based address of the display, up to 65534 (0xFFFE).
Address 0xFFFF is reserved as a “Broadcast” address to all displays.
* [CONTROL]
bit 0-1 : RH Tally Lamp state
bit 2-3 : Text Tally state
bit 4-5 : LH Tally Lamp state
bit 6-7 : Brightness value (range 0-3)
(Not used)
bit 8-14 : Reserved (clear to 0)
(Not used)
bit 15 : Control Data (clear to 0)
2 Bit Tally values are:
0 = OFF, 1 = RED, 2 = GREEN, 3 = AMBER.
* [LENGTH] : Byte count of following text.
* [TEXT] : UMD text, format defined by FLAGS byte.
Tally1
CHANNEL1
Tally2
DLE
(1 BYTE)
STX
(1 BYTE)
PBC
(2 BYTE)
VER
(1 BYTE)
FLAGS
(1 BYTE)
SCREEN
(2 BYTE)
INDEX
(2 BYTE)
CONTROL
(2 BYTE)
LENGTH
(2 BYTE)
TEXT
(String)
