manualshive.com logo in svg

TVLogic R-5T, Operation Manual, Page: 8 / 44

Share
Download
TVLogic R-5T Operation Manual Download Page 8

LCD R

ack M

oun

table M

onit

or  8

3. Controls & Functions

  REAR

• 12G/6G/3G [SDI IN/OUT] (BNC)

- Signal input/output terminals for 12G/6G/3G/ 

  HD/SD SDI signal.

- Outputs the SDI signal input from the [SDI IN]  

  terminal to [SDI OUT] terminal.

• 3G [SDI IN/OUT] (BNC)

- Signal input/output terminals for 3G/HD/SD  

  SDI signal.

- Outputs the SDI signal input from the [SDI IN]  

  terminal to [SDI OUT] terminal.

• [HDMI IN] (HDMI)

- Signal input terminals for HDMI signal.

• [REMOTE] (RS-422)

- Provides connection to control  equipment

  (parallel switch) for external monitor control.  

- Features of the each pin  can be changed in the 

  [MARKER] section of the OSD menu.

• [RS-422 IN/OUT] (RS-422)

- Used to control the Dynamic UMD function  

  with the TSL3.1 protocol.

• DC IN 

-12V DC

RS-422 IN RS-422 OUT REMOTE

DC IN

12G/6G/3G

SDI IN

12G/6G/3G

SDI OUT

3G-SDI

IN

3G-SDI

OUT

HDMI

<WARNING!!>

When using the product make sure 

to ground, whenever possible, before 

connecting the input signal cable in order to 

prevent any possible damage to the product 

or connected devices. The damage may 

include signal noise, malfunction of main 

board or display panel. And the connected 

devices such as camera or video source player 

may also be influenced through signal cable. 

Please check if the AC power source and 

the power extender or power distributor is 

grounded.

Summary of Contents for R-5T













































Reviews:

No comments