TVLogic R-5T, Operation Manual, Page: 23 / 44

LCD R
ack M
oun
table M
onit
or 23
• DEFAULT
- Used to initialize OSD values to factory default.
- Available modes are DEFALUT and FACTORY.
- In the DEFALUT mode, except for the stored
3D LUT, all values are initialized.
- In the FACTORY mode, all values are
initialized to factory default.
• LUMINANCE
- Used to indicate the current Luminance value .
- In the case of System Default, the value returns
to factory default(after color calibration).
- Available values are from 0 to 50.
• INTERNAL PAT
- Generates ColorBar, Pludge and Grayscale
Pattern internally.
- Selectable range for Gray Pattern is from 0% to
100% with 5% increment.
* See section “7. Other Function -> [10] Internal
Pattern” for more information.
• DISPLAY ENABLE
- Used to set the LUMINANCE to the
minimum value when the time set in the still
image output is exceeded.
- When video is output or the MENU button is
pressed, the LUMINANCE is reset to the
original value.
- Settable options are ON, 5MIN, 10MIN, 20MIN
and 30MIN.
- In the Function Key, the screen can be turned
ON/OFF immediately by user’s choice.
• ECO SAVING
- Used to save power consumption
automatically when there is no monitor signal.
- When the signal is supplied, the brightness of
the monitor will be changed to the set value.
• FAST MODE
- Used to minimize the de-interlacing
processing time delay and improve
the quality of fast moving and fine
details under the interlaced format.
- Since the function of this feature is to minimize
the de-interlacing delays, it will not be
effective under the progressive format.
- Feature bypasses deinterlacer, playing back
2 full fields per frame. Also reduces signal
processing delay for reduced audio/video
delay.
• S/W UPGRADE
- Used to upgrade the firmware using USB
(Thumb drive).
* See section “7. Other Functions -> [12]
Firmware Upgrade” for more information.
• VERSION
- Displays current firmware version.
• SERIAL NUM
- Displays the serial number of the monitor.
[7] SYSTEM / GPI / UMD
5. Menu Operations
SYSTEM / GPI / UMD R-5T
DEFAULT
LUMINANCE
INTERNAL PAT
DISPLAY ENABLE
ECO SAVING
FAST MODE
SW UPGRADE
VERSION
SERIAL NUM
OFF
OFF
OFF
OFF
0
OFF
SW 00 FPGA 00 BOARD 00
12345678
+ 48
PAGE(1/3)