TVLogic LVM-170A Operation Manual Download Page 5 | Manualshive

Page: 5 / 52

background image

Multi Format LCD Monitor 5

1. Caution

•

• When mounting the product on a wall or
ceiling, be sure to install the product

according to the method recommended by the
manufacturer.

•

• Unplug the power cord from the AC outlet
  before cleaning the product. Use a damp cloth
  to clean the product. Do not use liquid cleaners
  or aerosol cleaners.

•

• Unplug the power cord from the AC outlet if
you do not use the product for considerably
long time.

•

• Do not use the product near water, such as
bathtub, washbasin, kitchen sink and laundry
tub, swimming pool and in a wet basement.

•

• Keep the product away from direct rays of the
Sun-light.

•

• Do not place the product on an unstable cart,
  stand, tripod or table. Placing the product on
  an unstable base can cause the product to fall,
  resulting in serious personal injuries as well as
  damage to the product. Use only a cart, stand,
  tripod, bracket or table recommended by the
  manufacturer or sold with the product. When
  mounting the product on a wall, be sure to
  follow the manufacturer’s instruction. Use only
  the mounting hardware recommended by the
manufacturer.

•

• When relocating the product placed on a cart,
  it must be moved with the utmost care.
  Sudden stops, excessive force and uneven fl oor
  surface can cause the product to fall from the
cart.

•

• The vents and other openings in the cabinet
are designed for ventilation. Do not cover or
block these vents and openings since

insuffi

cient ventilation can cause overheating

  and/or shorten the life of the product. Do not
  place the product on a bed, sofa, rug or other
  similar surface, since they can block ventilation
  openings. This product is not designed for
  built-in installation; do not place the product
  in an enclosed place such as a bookcase or
  rack, unless proper ventilation is provided or
  the manufacturer’s instructions are followed.

•

• The LCD panel used in this product is made of
  glass. Therefore, it can break when the product
  is dropped or applied with impact. Be careful
  not to be injured by broken glass pieces in case
  the LCD panel breaks.

•

• Keep the product away from heat sources
such as radiators, heaters, stoves and other heat
generating products (including amplifi ers).

«
...
3
4
5
6
7
...
»

Summary of Contents for LVM-170A





















































Reviews:

No comments

Related manuals for LVM-170A

Brand: babymoov Pages: 2

Brand: babymoov Pages: 40

Weather Monitor II

Brand: DAVIS Pages: 5

Brand: Hantarex Pages: 25

Brand: I-Tech Pages: 16

Brand: Acer Pages: 14

Brand: I-Inc Pages: 1

Brand: Riken Keiki Pages: 25

SmartGLCD 240x128

Brand: mikroElektronika Pages: 37

Brand: OSEE Pages: 28

ProLite T1932MSC

Brand: Iiyama Pages: 1

Brand: Mace Pages: 2

VX922 - 19" LCD Monitor

Brand: ViewSonic Pages: 23

Brand: I-Inc Pages: 1

Brand: Hanns.G Pages: 1

Brand: Quick Pages: 36

Brand: AOC Pages: 29

SyncMaster 323T

Brand: Samsung Pages: 78

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands