TVLogic LVM-095W-N2 Operation Manual Download Page 11 | Manualshive

Page: 11 / 40

background image

Multi Format LCD Monitor 11

[1] Menu Tree

4. Menu Tree & Adjustment

•  OSD(On-Screen Display) Menu helps you
  use various functions.
•  This Picture is the menu structure for
  LVM-095W-N2 / SRM-095W-N

•  User may control various functions using
  the MENU, UP, DOWN, ENTER buttons on
  the bottom front of the monitor.

• Menu Control sequence follows the order
below:

1. Press the MENU button to activate the OSD
    menu.
2. Move to a desired menu with the UP/DOWN
    button.
3. Press the ENTER button to select a menu
    and move to a sub-menu with the UP/DOWN
    button.
4. Press the ENTER button to select the desired
    sub-menu. (The selected sub-menu will be
    highlighted)
5. Press the ENTER button or the MENU button
    to save the new value after adjusting the
    value with the UP/DOWN button.
6. Press the MENU button to return to the
    previous menu and if there is no previous
    menu, the OSD menu will be removed from
    the screen.

[2] Menu Control

[3] Menu Control Sequence

«
...
9
10
11
12
13
...
»

Summary of Contents for LVM-095W-N2









































Reviews:

No comments

Related manuals for LVM-095W-N2

Brand: Xenarc Pages: 16

Brand: A&D Pages: 2

Brand: A&D Pages: 2

Brand: 4iiii Pages: 2

Brand: Gateway Pages: 2

MultiSync LCD2180WG-LED

Brand: NEC Pages: 18

Brand: Acer Pages: 114

Brand: Acer Pages: 4

Brand: LifeSource Pages: 13

BeeConnect Plus 50120

Brand: Reer Pages: 64

Brand: AG Neovo Pages: 53

Brand: CORNEA Pages: 20

Brand: Daewoo Pages: 27

Brand: Electro-mech Pages: 29

Brand: Lorex Pages: 24

Brand: ViewSonic Pages: 53

MediaMaster I05

Brand: JL Audio Pages: 43

Brand: Kodak Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands