TVLogic LUM-181G, Operation Manual

Page: 16 / 44

03 CONTROLS & FUNCTIONS
16
4K /UHD HDR Emulation LCD Monitor
LUM-181H / 181G / 242H / 242G / 328G / 550H : FRONT
●
[SCAN] Button
- Used to select [Zero Scan] and [Over Scan].
●
[ASPECT] Button
- Used to select ASPECT mode.
- Available aspect modes are [FULL], [4:3],
[ 2.35:1], [1.85:1], [15:9], [16:9], [16:10],
[ AUTO ] .
●
[MARKER] Button
- Used to activate/deactivate the Marker.
●
[B. LIGHT] Button
- Used to adjust the backlight level.
- Turn the ENTER knob left or right to adjust
the value.
●
[VIDEO RANGE] Button
- Used to select the video range.
- Available modes are [Narrow 100%],
[Narrow 109%], [SDI Full].
- This function activates when [Standard] -
[User1/2/3/4/5/6] is selected.
●
[INFO.] Button
- Used to activate the information window.
- Refer to the page 29 for the details.
●
[MENU/EXIT] Button
- Used to activate/deactivate the OSD menu.
- Press the MENU button again to deactivate
the OSD menu.
●
[UP/DOWN/ENTER] Knob
- Used to move up/down through the menus
during the OSD menu activation and also to
increase/decrease the value of the selected
feature.
- Press the Knob to confirm a chosen value
(or mode).
- May also be used to control the [Backlight] -
[Brightness] - [Contrast] - [Volume] value
during
the OSD menu inactivation. Turn the Knob to
the left/right to adjust the value.
●
[POWER INDICATOR] Lamp
- Indicates condition and power status of unit.
- Light turns off when the power is disconnected.
- Standby mode is indicated by a red LED light.
- Normal (active) mode is indicated by a
Green LED light.
- The Green light turns off when the monitor
is Normal(active) mode without input signal.
●
[POWER] Button
- Used to turn the power on and off.
- Hold the Power button for 3 seconds to
turn off the unit. This is to prevent the unit
from being turned off by touching the Power
button by accident.
●
[Audio out] (PHONE JACK)
- Selects the left/right Audio embedded signal
output.
●
[USB]
- Used to update the new firmware.
- Used to calibrate the monitor’s color
temperature using color calibration tool.