12
Use the ‘Up’ and Down’ buttons to set the limit values; press and hold the
selected button to increase the speed of change.
Press the ‘Log’ button to toggle between the ‘High’ limit and ‘Low’ limit.
Once the Limits have been set to the required levels press the ‘Reset’
button to Exit the Setup screen and save the limit levels. Press the ‘Reset’
button a second time to exit the ‘Setup’ screen and return to the main
system O2 monitoring and operational screen.
2.7
Data viewing and reporting
To view the recorded data on a PC, connect the HPM using the USB cable
provided.
The HPM unit will display the following screen whilst it is connected:
