7 Press [Exit] key to exit the scanning.
6.2 Channel Scan
When entering to “Channel Scan” menu, a channel scan menu will be
shown as below:
1 There are two choices of “Scan Mode,” by channel or by frequency.
If you scan by channel, “Scan Band” and “Ch No” are available to be
adjusted. If you scan by frequency, “Frequency” and “Bandwidth” are
available to de adjusted.
2 There are two choices of “Scan Band,” “UHF” or “VHF.”
3 There are 56 choices of “CH No” ranging from In frequency
“CH05(177500Hz) ” to “CH69(858000Hz).”
4 You can adjust any frequency to search by.
5 There are three choices of “Bandwidth”, 6, 7, and 8 MHz.
6 When you complete your modification, move highlight to “Search” item
and press [OK] key, then it will begin to scan.
When entering to “System Setup” menu, a menu will be displayed as below:
6.3 LCN
LCN: To toggle the LCN mode On/Off
7. System Setup
Basic Operationss
22
