TV Star T7200 CX HD, User Manual

Page: 3 / 97

Important Safety Instructions
About manual
This manual covers general functional features of your decoder (signal converter). All initial
information is provided in this document. Prior operation, please, ensure that your decoder is
properly installed. After, using a remote control please perform indications, provided in this manual.
Since you will familiarize with the remote control and analyse features of decoder, this manual will
be useful as a source of references.
Manufacturer reserves a right to modify construction of a hub and user’s menu without prior
notification.
About your hub
DVB-T hub of high resolution can accept digital over-ground channels, compressed under HD
MPEG4 (H.264) and MPERG-2 standards. Enjoy broadcastings of high DVB-T video quality.
Device has decoding card-reader, allowing decoding programmes, encode
d by “Conax”.
Security

Prior use of this hub, please read this manual carefully.

Only horizontal hub position is allowed, do not place in a shelf (book-shelf, etc.).

In case of thunder, a hub must be switched off. Keep away from direct sunlight. Do not place any
vases with liquids.

Prior connecting antenna or any other connecting cables, please disconnect a hub from power
source.

In case you leave home or not using a hub for prolonged period or thunder is forecasted, please,
disconnect power adapter from power source.

Technical maintenance is to be performed only if a hub is completely disconnected from a power
source.

In order to ensure proper venting, the distance around a hub should be at least 5 cm.

Do not place any objects of open fire (candles, etc.).

Keep a hub away from the places, where water is splashing or dripping; do not place any objects
with liquids near.

A hub is to be used inside only, ambient tempe5

+40
o
C.

Complete disconnection of a hub is achieved by mean of adapter plug. Hub is disconnected if an
adapter is unplugged from power source. Alternative disconnection is performed unplugging an
alternative dipolar automatic device of disconnection and protection.

In case power plug or electricity connection is used as a disconnection device, the access to it
must be without obstructions.

In case no light is on, a hub is disconnected from power source.

Furthermore, electricity installation of premises must include disconnection device, which has to
be used to disconnect a hub from power source completely, in case of technical maintenance.

Adapter should be used for hub power (included in a package).

A hub is to be used under normal climate conditions.