8
5.0
OPERATION OF THE LM-702HDA
After mounting the LM-702HDA in a rack and connecting the appropriate cables and the
AC adapter, press the power button on each monitor and select the appropriate inputs.
Adjust the vertical viewing angle if desired and then use the On Screen Display (OSD)
and Menu structure to make any changes you desire to the functionality of the individual
monitors.
Input selection is made by pressing the appropriate button on the front panel of each
monitor. The possible selections are SDI, YPbPr, V1 (Composite Video) V2 (S-Video) or
PC.
Once the input selection has been made, you may choose the image’s aspect ratio and
also adjust the audio
volume of the monitor’s built in headphone output.
5.1
Using the On Screen Display Menus
Beyond simple use of the monitors, users should acquaint themselves with the On
Screen Display (OSD) and Menu structure. Within this functionality the user can fine
tune the operation of the unit and often make improvements to the appearance of the
displayed image. Using the OSD Menu is not difficult and allows you to adjust the
picture quality of the monitors. Each monitor has its own OSD Menu.
5.1.1 Menu Navigation:
To utilize the menu and the (OSD), press the Menu button. This makes the Menu list
appear and you will then use the two arrow buttons to navigate the list and make
adjustments. Move within the Menu using the arrow buttons and select the item you
wish to change or adjust by pressing the Menu button. Once selected, use the arrow
buttons again to make the function change or adjustment and press the Menu button
again to confirm your selection or adjustment. Allowing the OSD to time out will store
your settings. The Reset function returns the settings to the factory default and exits the
OSD Menu. The Menu List and Functions are as shown on the next page.
