5.2 DIP Switch Settings
On the rear on the unit, you’ll find four active DIP Switches. The selections are:
SW1: OFF
= Auto-Detect Off, Default NTSC,
ON
= Auto-Detect NTSC or PAL
SW2 + SW3:
PC Operating System
SW2 SW3
Setting
OFF OFF
DV
Camcorder
OFF
On
WIN 2K/WIN XP
On
Off
WIN 98/WIN ME
SW4:
=
Off
7.5 IRE,
On
= 0 IRE Setup (NTSC Only)
If you have a clean input and the input is a valid format, the unit should begin
conversion of the signal as soon as you have the proper selections made. No
adjustments are required to enable signal conversion beyond those explained above.
5.3 Hardware Checkout
Follow the instructions below to install and checkout the hardware.
5.3.1 Hardware Operation Verfication
•
Connect the DV-1394-A70’s A/C Power adapter and press the power button.
•
Connect the 6 Pin 1394 cable between the DV-1394-A70 and computer or
camcorder.
Note: Connect directly to the 1394 Host port. Connecting via a 1394 Hub or
Repeater is not recommended.
•
WinXP and Win2000 will automatically recognize the device and install drivers.
(WinME and Win98SE may ask for drivers from the Windows CD.)
•
Once the device drivers are installed, the DV-1394-A70 will appear under Windows
Device manager as an Imaging Device.
•
Connect Audio/Video cables between your video devices and DV-1394-A70.
Checking DV-1394-A70 Connection
After connecting all the devices, power on computer, then the DV-1394-A70 card and
camcorder. Windows will auto-detect new devices, and two new “
Imaging Device
” will
be added as “
Microsoft DV Camera and VCR
”. One is the DV-1394-A70 and the other
is the camcorder. Please refer to the following picture:
9
Summary of Contents for 1T-DV1394-A70
Page 1: ...Instruction Manual 1T DV1394 A70 DV Analog Converter...
Page 2: ...2...
Page 14: ...NOTES 14...
Page 15: ......
