TV Logic LVM-171S, Operation Manual

Page: 16 / 36

16 Multi Format LCD Monitor
●
GROUP ID
- Used to group the monitors to control the
monitors by group when the monitors
are controlled by using RS-422/485
communication or Network.
●
MONITOR ID
- Used to set the ID of each monitor for the
TVLogic control protocol or DYNAMIC UMD
using RS-422/485 communication or
Network.
- Available values are between 0,2,4 ~ 98.
- Right screen in PBP mode is automatically
set to +1 of the monitor ID.
●
DHCP
- Used to set DHCP.
●
IP ADDRESS / SUBNET MASK / GATEWAY
- Used to set the Network address.
●
PORT NO
- Used to set the port number. The default
value is 10262.
●
SETTING APPLY
- Used to apply the settings.
●
The pin positions are as follows :
[4] GPI
5. Menu Operations
wpuGX
nwp
΁ͺͿ͑ͣ
΁ͺͿ͑ͤ
΁ͺͿ͑ͥ
΁ͺͿ͑ͦ
΁ͺͿ͑ͧ
΁ͺͿ͑ͨ
͸΃΀Ά΁͑ͺ͵
΁ͺͿ͑ͩ
;΀Ϳͺ΅΀΃͑ͺ͵
͵͹ʹ΁
ͺ΁͑Ͳ͵͵΃Ͷ΄΄
΄ΆͳͿͶ΅͑;Ͳ΄ͼ
͸Ͳ΅ͶΈͲΊ
΁΀΃΅͑Ϳ΀͟
΄Ͷ΅΅ͺͿ͸͑Ͳ΁΁ͽΊ
s}tTX^Xz
uvul
zkpGjohuuls
oktpGjohuuls
|uklyGzjhu
hzwlj{
oV}Gklsh€
is|lGvus€
tvuv
vu
X`YUX]_UXUXWW
Y\\UY\\UY\\UW
X`YUX]_UXUX
vu
W
W
XWY]Y
REMOTE (RJ-45)
1: Pin1
2. Pin2
3. Pin3
4. Pin4
5. Pin5
6. Pin6
7. Pin7
8. GND
1 8