manualshive.com logo in svg

TV Logic LEM-150, Operation Manual

Share
Download
TV Logic LEM-150 Operation Manual Download Page 36

Multi F

orma

t L

CD M

onit

or 

3

Multi F

orma

t L

CD M

onit

or 

3

Menu Contents

◦

 

VOLUME

- Controls the embedded audio output volume for the internal speakers of the monitor.
- Available values are between 0 ~ 30.

◦

 

Em. AUDIO RIGHT

- Controls embedded audio channel for right audio out internal speaker of the monitor.
- In HDMI mode, HDMI audio output.
- In COMPOSITE, S-VIDEO, COMPONENT, RGB, DVI ANALOG and DVI DIGITAL modes, the audio signal 
  that is connected with [AUDIO IN] terminal input on the back of the monitor output.
- Available values are OFF and  CH 1 ~ CH 16.

◦

 

Em. AUDIO LEFT

- Controls embedded audio channel for left audio out of internal speaker of the monitor.  
- In HDMI mode, HDMI audio output.
- In COMPOSITE, S-VIDEO, COMPONENT, RGB, DVI ANALOG and DVI DIGITAL modes, the audio signal 
  that is connected with [AUDIO IN] terminal input on the back of the monitor output.
- Available values are OFF and CH 1 ~ CH 16.

Summary of Contents for LEM-150





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands