Replacing the Silicone Ear Tips with foam TV Ears Tips:
Heed all above warnings and notes about foam TV Ears Tips and Silicone Ear Tips.
1.
If you are already using silicone ear tips, remove them prior to installing TV Ears Tips. They will
easily pull of the headset.
2.
Install the snap tip adapters by gently twisting them onto the ends of the headset.
3.
Open the package of ear tips and place it on a level surface.
4.
Place the pointed end of the snap tip adapter into the center hole of the new ear tip and push
down until you feel the new ear tip snap on the snap tip adapter (see diagram above).
5.
Gently pull the headset away from the tray.
Replacing the Battery:
Batteries will last up to 1-2 years depending on usage. If you notice reduced sound and range it may be
time to replace the battery. Only use proprietary batteries purchased from TV Ears. Be sure to purchase
the same model battery as the headset you own.
To replace the batteries, you will need:
•
New faceplate with TV Ears batteries installed
(can be purchased from TV Ears
representatives)
•
TV Ears headset
•
Small #1 Phillips head screwdriver
Replacement Instructions:
If you are uncomfortable or have trouble replacing the battery yourself, contact your local TV Ears
customer service.
1.
Turn the headset OFF.
2.
Place the headset on a level surface, front side down.
3.
Using the small #1 Phillips head screwdriver, remove the two screws on the back of the
headset next to each bow arm.
4.
Turn the headset over and remove the faceplate with the TV Ears logo.
5.
Place the new faceplate with batteries on the headset and turn over.
6.
Using the same screwdriver gently put the screws in place and attach the new faceplate.
7.
Place the headset on the transmitter-charging cradle and allow your TV Ears to charge for at
least 1 hour.
Note:
The supplied rechargeable batteries can be recycled. In order to protect the environment,
only dispose of exhausted rechargeable batteries at a recycling facility. Do not dispose of
batteries in trash.
