Tuxedo MR6K-38, Operation Manual

Page: 20 / 29

4.2.4 To Lower Lift
a. Check all danger points of the lift and be sure that there are no objects or people in
the working area (danger area) around the lift or on the lift
.
b. In order to lower the lift to the required working height or to its lowest (or fully
collapsed) position, First raise the lift
approx. 2"
to clear the locking latches. Then
push the air-valve button and when keeping it be pressed, push the release lever
on the motor pump.
c. Observe the complete lowering process.
d. When the lift is in its lowest position, remove the polymer supports.
e. Drive the vehicle
off
the lift.
Remain clear of lift when lowering vehicle. Observe pinch point warning decals.
If lift is not operating properly, DO NOT use until adjustment or repairs are made
by qualified lift service personnel.
4.2.5 Change the installation place
a. Lower the lift in the lowest position.
b. Drive the vehicle from the lift.
c. Raise the lift
to
a height of approx. 500mm.
d. Use the mobile set. Put in the steering roller and the fixed roller.
e. Lower the lift into the lowest position. Simultaneously, the base-plates
will
lift themselves.
f. Now the automotive lift is movable.
g. Remove the steering rod
once the lift is in its new location
.
h. Remove the mobile set.
- - 16