7
WIRING CONNECTIONS
Make sure you have good chassis ground. A good ground connection will eliminate most
electrical noise problems. A good chassis ground requires a tight connection to the
vehicle’s metal chassis. The area around the ground connection should be clean, bare
metal without rust, paint, plastic, dust, or dirt for a good electrical connection.
Caution:
Do not interchange the connection of the wiring!!!
For some car models you may need to modify wiring of the supplied power cord. Contact
your authorized car dealer before installing this unit.
Using the ISO Connector
1. If your car is equipped with the ISO connector, then connect the ISO connectors as
illustrated.
2. For connections without the ISO connectors, check the wiring in the vehicle carefully
before connecting, incorrect connection may cause serious damage to this unit.
3. Cut the connector; connect the colored leads of the power cord to the car battery as
shown in the color code table below for speaker and power cable connections.
NOTE:
Never connect cable to the system while it is connected to the battery power.
Whenever the unit is disconnected from the battery, the preset memory will be erased and
the unit will go back to its factory defaults.
When the brown cable for steering wheel control connected to the steering wheel, we can
use the steering wheel to control some unit
Note:
To watch video the parking wire should be connected to break signal. 2
cables is connected to a Hands-Free device (not included).
Summary of Contents for KSD7875
Page 24: ......
