background image

WARNING!

 

 

 

 

To  promote  safety,  certain  functions  are  disabled  unless  the  parking  brake  is  on.  The  Unit  is 
designed  to  detect  parked  status  and  must  be  connected  to  the  power  supply  side  of  the 
parking brake switch. Improper connection or use of his connection may violate applicable law 
and  may  result  in  serious  injury  or  damage.  To  avoid  the  risk  of  damage  and  injury  and  the 
potential violation of applicable laws, this unit is not for use with a video screen that is visible to 
the driver. 

  To avoid the risk of accident and the potential violation of applicable laws, the front Video 

image  feature  should  never  be  used  while  the  vehicle  is  being  driven.  Also,  other  video 
displays  should  not  be  in  a  location  where  it  is  a  visible  distraction  to  the  driver.  In  some 
countries  or  states  the  viewing  of  images  on  a  display  inside  a  vehicle  even  by  persons 
other  than  the  driver  may  be  illegal.  Where  such  regulations  apply,  they  must  be  obeyed 
and this 

unit’s DVD features should not be used. 

  Please remember to wear your seat belt at all times while operating your vehicle. If you are 

ever in  an accident, your injuries can be considerably more severe if your  seat  belt is not 
properly buckled. 

  The supplier waves any and all liability when these warnings are not followed. 

 

OPERATION PRECAUTIONS

 

 

  Only connect to a 12Vdc battery and negative grounding. 

  Avoid  placing  the  product  in  direct  sunlight,  in  areas  with  high  levels  of  dust,  high 

temperatures (over 40°C) or high humidity (over 90%). In case of high temperatures,  cool 
down the car interior by means of ventilation or air-conditioning. 

  Operate in well ventilated areas. 

  Do not turn on or off the product in short intervals. When turning the unit off, wait for at least 

10  seconds  prior  to  turning  the  unit  on  again.  Do  not  operate  the  player  with  scratched, 
bended  or  broken  discs  and  when  a  disc  is  not  loaded  properly,  do  not  force  it  into  the 
player. 

  Do not watch video playback while driving which will cause serious danger and risks of 

traffic accident. It may violate the laws and regulations. 

(There may be exceptional case, i.e., using rear view camera and navigation system) 

  Do not install the unit where the operation for safety driving is restrained. 

  Do not disassembly the unit by yourself, if need repairing, please take the unit to the after 

service center. 

  Do not open and close the monitor manually, it may damage the monitor tilt system. 

  Do not touch the LCD screen by hard objects, it may damage or give scratch to the LCD 

screen. 

  If the back of monitor touches dashboard or air-conditioner inlet etc after open the monitor , 

then setup TILT level in monitor TILT menu to prevent damage from repeat touching. 

  Car parking under direct sunlight may increase the temperature inside the car and the unit 

may not be in proper operation, please try it again after the temperature returns to normal. 

  Do not replace the fuse on the power cable without professional guidance, using improper 

fuse may cause damage to the unit or even cause burn the unit. 

  Do not use irregular shaped Disk. 

  IR remote control operation may be hindered by monitor when the monitor is opened, thus 

please use the remote control at the similar level of remote control receiver. 

  Do not install the unit where the cooling fan is blocked. 

Summary of Contents for KSD7875


























Reviews: