www.tuv.com
Test Report No.: 14014459 001
Appendix 4
page 23 of 41
(Page 6)
Insert the charger plug into the headset’s charging socket (refer to Figure 3) and plug the mains charger to an
AC wall outlet. The battery icon showed on the headset will be displayed during charging.
IMPORTANT: Charging indication will be delayed for a few seconds if the headset has not been used for
a long time or the battery is drained.
Normal Charging Time
It takes about three hours to fully charge the battery. When the battery is fully charged, the battery icon will stay
on and indicate it is ‘full’. Unplug the mains charger from the AC wall outlet and the charger plug from the
headset. Press and hold the MFB (refer to Figure 1) for two seconds to turn on the headset. Please refer to
“Turning Your Headset On and Off” on the next page for further details.
Talk and Standby Time
A fully charged battery can offer up to 6.5 hours of talk time and up to 150 hours of standby time. When there
are no calls the headset should remain turned on in standby mode.
Battery Low Indication
If the battery becomes low when the headset is on, the battery icon will go empty and the headset will emit a
beep* every minute. Please follow the instructions described above to recharge the battery.
*If you are pairing your headset and your mobile phone in a noisy environment, we advise you to put on the
earphone first so that the beep will be more audible.
