3
02
Safety
Operator’s Manual 2010 Rev B p/n 2010
WARNING
!
Hearing protection
required.
CAUTION
!
Do not operate without
guards in place.
CAUTION
!
Do not touch hot
surfaces.
WARNING
!
• Keep hands and clothing away from
rotating machinery, inlet and discharge
openings.
• Blower and drive mounting bolts must be
secured.
• Drive belts and coupling guards must be
in place.
• Noise level may require ear protection.
• Blower heat can cause burns if touched.
Safety Precautions
For equipment covered specifically or indirectly
in this operating manual, it is important that all
personnel observe safety precautions to minimize
the chances of injury. Among many considerations,
the following should particularly be noted:
• Blower casing and associated piping or
accessories may become hot enough to cause
major skin burns on contact.
• Internal and external rotating parts of the blower
and driving equipment can produce serious
physical injuries. Do not reach into any opening
in the blower while it is operating or while
subject to accidental starting. Cover external
moving parts with adequate guards.
• Disconnect power before doing any work, and
avoid bypassing or rendering inoperative any
safety or protective devices.
• If blower is operated with its piping
disconnected, place a strong, coarse screen
over the inlet and avoid standing in discharge air
stream.
• Avoid extended exposure in close proximity to
machinery with high intensity noise levels.
• Use proper care and good procedures in
handling, lifting, installing, operating, and
maintaining the equipment.
• Other potential hazards to safety may be
associated with operation of this equipment.
All personnel working in or passing through the
area should be warned by signs and trained to
exercise adequate general safety precautions.
• Hearing protection may be required depending
on silencing capabilities.
Summary of Contents for 3200
Page 39: ......
