System Administration
TUT Systems, Inc
Page 42 of 104
P/N
220-06288-20
Upgrading from Tut Systems’ Website
1. Go to the Tut Systems website at http://www.tutsystems.com.
2. On the Support pull-down menu, click "SMS/OCS".
3. Click
Downloads.
4. Enter your Company's name and product serial number (as printed on your invoice)
where required. If you purchased the product before 1-September-2000, or have
purchased the product through a third party, please contact Customer Support.
5. Click
Login.
6. Obtain the URL required for the SMS2000
load sys
command, which is located at
the bottom of the
Latest SMS/OCS Software and Documentation
section of the
website. The
load sys
command will be in this format:
sms2000%
load sys
url
Where the
url
is listed on the Tut Systems Web site.
Note:
The complete URL for the latest build is on the Tut Systems web site.
7.
Log in to the SMS2000 and type in the
load sys
command that you obtained from
the Tut Systems website.
Downloading the SMS2000 Firmware from
the Tut Systems' Website
1. Go to the Tut Systems website at http://www.tutsys.com.
2. On the Support pull-down menu, click "SMS/OCS".
3. Click
Downloads.
4. Enter your Company's name and product serial number (as printed on your invoice)
where required. If you purchased the product before 1-September-2000, or if you
purchased the product through a third party, please contact Customer Support.
5. Click
Login.
6. Click SMS2000 Version 2.3.2 Firmware.
Archiving SMS2000 Firmware and
distributing it from a Server
1. Download the firmware using a browser utility from the source server at Tut
Systems.
2. Place the firmware on the local ftp or http server.
3.
To load the firmware, use this command, where
your url
is the URL to the file:
sms2000%
load sys
your url
Note:
The OCS server is an http server and can be used to archive SMS2000
firmware builds.